800-633-9969
2020 Blogs
 
 
Posted by Dennis Blauser, September 1, 2020

Prevention is the most effective method to ensure the integrity and continued operation of your silo. Regular maintenance and inspections can increase the life of your silo and ensure the safety of those working around your structures.

Though frequent inspections should be conducted in-house to catch warning signs early on it is important to understand the accompanying limitations. Many serious issues can only be identified by experienced silo inspectors or silo engineers during in-depth examination of empty silos free from material buildup.

The routine examination of your silo is effective in increasing facility safety and ensuring smooth operations only when it is conducted in conjunction with professional inspections as part of a regular preventive maintenance schedule. When used in place of professional services, in-house inspection, cleaning, and repair procedures increase safety risks. Failed silos can sometimes be repaired and some stored material can be recovered. However, companies often face additional costs from cleanup, possible environmental damage, injury, or loss of life.

While working on welding and fabricating metal bins for a concrete silo in December 2016, a fire broke out and resulted in the death of one crew member. After determining the crew did not have the required confined space permit, a general negligence action was settled for $1.75 million. (Michigan Lawyer Weekly, April 2017)

In August 2013, employees at an Ohio-based concrete facility attempted to remove material buildup of fly ash clumps in a clogged silo. After cleaning attempts of the interior using “a metal bar and air hose failed” an employee, who entered the silo without a lanyard and harness, died when a fire erupted. During the investigation, OSHA noted 10 serious safety violations, which resulted in a fine of $55,800. (OSHA News Release, November 2013)

Both of these accounts highlight preventable accidents where the necessary confined spaces permit was not held and the workers did not have the necessary safety training. Confined space permits and safety training are essential for safe inspections. While there are no inspection recommendations specific for silos, OSHA does have policies regarding confined space entry that are essential for interior inspections.

The effective inspections, however, depend on more than this permit. Inspectors must also have field experience and an understanding of the unique properties that effect silo material flow and structural integrity. Industry experience further enables trained silo and bin inspectors to recommend preventative maintenance to address issues before they become serious problems. Only inspectors with industry experience and proper silo engineering, design, and construction training can anticipate these issues to increase the effectiveness and safety of your silo.

It is recommended that you conduct professional inspections at two- to five-year intervals to help identify any issues that could lead to structural failure. Silo inspections should include examining the main aspects known to be potential areas of failure. These inspections should include the foundations, walls, cones, discharge configuration, floors, shelves, tunnels, and roofs.

The Mine Safety and Health Administration (MSHA) and OSHA have consistently emphasized a focus on silo processing and activity, but in recent years, one of their primary efforts has been on the importance of workplace safety and accident prevention. When it comes to the enforcement of safety policies, if there is an issue within a facility, the MSHA and OSHA are expecting to see a current silo inspection report for reference and assessment. Many insurance companies are also now requiring silo inspections on the facilities they insure.

Inspections can uncover problems that require immediate remediation. The most important thing to remember when conducting silo inspections is to consult a professional silo inspection and repair company if you discover anything alarming. You should also defer to a professional inspector if you do not have personnel with the necessary permits for closed space entry.

The importance of having regularly scheduled inspections by a professional silo company is even more evident in a recent case study in Florida where multiple discharge asymmetric flow failures were present.

To learn more, be sure to check out our full library of silo inspection videos on silo maintenance, inspection and repair on

 

 
Posted by Dennis Blauser, August 3, 2020

Concrete stave silos are reinforced with exterior, galvanized steel hoops, which help compress the walls and provide necessary tension for structural integrity. The concrete staves act to distribute the load of the material over the hoops. 

The hoops are the primary structural stabilizer of the silo and for this reason; it’s essential to inspect the condition of the exterior hoops, as they are vital to the health and safety of the silo. The exterior hoops shouldn’t be bent, broken, falling off, or lying on the ground. It’s also important to make sure the hoops aren’t heavily corroded. Hoops are bolted together with a lug, which can lead to issues if it begins to corrode. The hoops are tensioned to a specific rating and pressure, so it’s essential that the hoop has not been welded to and stands independently.  

Since stave silo construction utilizes steel galvanized hoops for structural integrity of the bulk storage system, failure to protect these hoops properly will shorten the designed stability of the entire system. A cementitious silo coating is ideal on concrete stave silos, protecting the steel galvanized hoops and preventing leakage. These bonding and waterproofing agents seal the joints between the staves and add a level of corrosion protection to the exterior steel hoops, ensuring long lasting defense against corrosive elements and deterioration.    

One recent case study examines a concrete stave silo with rusted and broken hoops, showing further evidence that failing to inspect your silo regularly will put your silo’s structural integrity, operability, and safety in jeopardy and require costly repairs in the future.     

To learn more, be sure to check out our full library of silo inspection videos on silo maintenance, inspection and repair on

 

 
Posted by Dennis Blauser, July 1, 2020

Silo CleaningJust as routine silo inspections are an essential component of your maintenance program, so too are routine cleanings. Regularly cleaning your silo can help keep it operating efficiently and limit potential liabilities. Regular cleanings also increase your silo’s usable lifespan, minimize big ticket repairs, and avoid more costly cleaning expenses. Silos that are emptied regularly and refilled will not have the same buildup issues as silos that are kept topped off, but every silo can benefit from a regular cleaning schedule.

Cleaning your silo can save you money in several ways. The primary savings are in recovering stagnant material that has built up inside your silo. This prevents losing that material and the resources — time, energy, labor — that went into storing it. Depending on your material, cleaning also can help prevent degradation or contamination that occurs when material sits too long, thus reducing or destroying its value.

Routine cleaning is necessary to remove the residue buildup inside the silo that reduces the volume of new material that the filled silo can hold. In all silos, cleaning removes old material residue which, in turn, helps maintain the freshness and concentration of the newly introduced material. Every silo, no matter the design or whether it’s steel or concrete, will benefit from a regular cleaning schedule. The benefits of a professional cleaning every year far outweigh the initial costs as this maintenance step keeps your silo running at full capacity, allowing maximum efficiency and leading to more consistent production schedules with no unplanned downtime.

Routine cleaning prolongs the life of your silo. Find out more on how to keep your silo clean and why it’s important to have your silo cleaned.

To learn more, be sure to check out our full library of videos on silo cleaning, construction, inspection and repair on .

 

 
 
 
 
©2024, Marietta Group, all rights reserved. Website by OffWhite
Ask Mr. Silo   |   USA Silo Service   |   Contact Us   |   Privacy Policy   |   Blog